How to Replace a Saab 9-3 Key
The Saab 9-3 is a fantastic car that offers a lot of driver appeal. It has a powerful engine and good visibility. It also has an excellent safety rating.
It is nevertheless important to ensure that you have at minimum two keys that work for your vehicle. If you lose one key, it can be very expensive to add a new one.
How to Replace the Ignition Key in the Saab9-3
If the car key won't start in the ignition and you want to replace it, you'll need to replace it. This guide will walk you through the steps to do it on a Saab 9-3. You'll need a new key as well as a reprogrammable battery and a brand new key-fob cover.
Unlike older models, most modern Saab vehicles use transponders in the key-fob, instead of a physical key made of metal to unlock and start the vehicle. The issue with this is that the reprogrammable battery in the key-fob can wear out and will not hold a charge any longer. This is especially when you use the same key for the lock you have.
The good part is that the battery can be replaced easily by an experienced locksmith. You can also do it yourself if have the proper tools and a bit of patience. The first step involves separating the key-fob. saab 9-3 key not accepted contact service is done by inserting a flathead screwdriver into the slot that is located in the middle of the case. The plastic is thin and it is susceptible to being damaged.
After the case has been opened, you can create the new key by combining the lower portion of the old key along with the transponder and banana. This will ensure that the new key is linked to the CIM properly, which can make a huge difference when replacing the primary key for your Saab 9-3.
How to Replace the Ignition Key in a Saab 900
Unless you have two keys, you'll have to take off the steering wheel and dashboard in order to access the ignition. Begin by disconnecting the negative battery cable. Once the battery is removed, you can remove all trim pieces and dashboard pieces that surround the steering wheel. Once the dashboard is removed, you can place screws into the hole behind the ignition switch.
The ignition cylinder is fitted with a key lock, which could stop the vehicle from starting if it does not have the key in it. If the ignition switch on your 900 isn't working, check the key to see whether it's inside the lock or snared into the ignition barrel. It's also a good idea to rotate your keys frequently and keep them clean so that one doesn't get bent.
Saab cars differ from other cars in that they do not have traditional keys made of metal. Instead, the car detects the key fob's electric signals by a specific chip inside it.
If you lose your only working key fob, the dealer will charge you the highest dollar to replace your computer module (known as the CIM). We can reprogram the EEPROM on your existing computer and allow it to accept new keys, without the need for replacement. This can save you over 50% of the cost the dealer charges! This is the SAAB Key PROGRAM. Find out more here!
How to Replace the Ignition Key on a Saab 9-5
The metal part of the classic Saab keys is simple to duplicate and does not pose a significant threat to vehicle theft. The electronic part of the key-fob is equipped with an embedded chip that can identify the car when the key is put in the ignition switch.
Saab's anti-theft device has been relying on this technology for over 10 years. It's not as effective as a physical door lock but it does make stealing your car a lot more difficult. This is why every Saab owner should keep an extra key available.
The majority of new Saabs are delivered with two keys, but they can be added by a dealer using a special handheld device known as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 cars, that have more modern and advanced features that require a separate key-fob, and work through a different process.
If you lose all keys and the dealer replaces your CIM or TWICE modules and charge an additional fee for it. However, we can reprogram your EEPROM in your existing computer and set it up to accept new keys without replacing the expensive modules.
How do I replace the ignition Key in the Saab XC90
If your SAAB 9-3 key fob is experiencing issues turning the barrel of the lock it could be time to replace it. The process is simple and you don't need to visit a dealer. Instead, you can do it yourself at home with only a few tools.
First, you'll need prepare the new key. Before you start, ensure that the anti-theft system is disabled by placing blocks on your rear wheels, and then adjusting the handbrake. After that, insert the key into the ignition and turn it to the on position, which activates the accessories but it doesn't start the engine. Repeat this five times, and then leave the key in the "on" position.
Next, you'll need to get a replacement case for your old key fob. They are readily available at many auto parts stores and are usually inexpensive. You can get them with or without electronics, depending on the model.
To open the case, place a flathead screwdriver inside the slot in the middle, and gently work it. The case should split easily and, once you have it, you'll be able to gain access to the internal electronics. To remove the electronics use a small screwdriver and attempt to pull them out gently.